  |
 Finds metal up to 2 inches (51 mm) deep behind walls, floors, and
in ceilings.
The iSensor® Metal Finder will scan through nonmetallic surfaces
up to 2 inches deep to find hidden pipes, conduit, nails, electrical
boxes, and more.
Use Metal Finder to find metal pipes behind tile, rebar in concrete,
or nails in used lumber. The single LED starts blinking when you are
near metal, blinks faster as you get closer, and shines steadily directly
over the target.
| Dimensions: |
4.69 in. H x 1.45 in. W x 1.18 in. D
(119 mm x 37 mm x 30 mm) |
| Weight: |
1.7 oz. (48 g) without battery |
| Battery Type: |
9-volt alkaline (not included) |
| Battery Life: |
One year at 10 minutes/day use |
| Position Accuracy |
Wood Studs:
Typically within 1/8 in. (3 mm) using the dual scan and mark procedure.
Metal studs:
Typically within 1/2 in. (13 mm) using the dual scan and mark procedure. |
| Detection Depth |
Typically up to 5/8 in. (16 mm)
NOTE: Sensing depth and edge detection can vary due to
moisture content of materials, wall texture, paint, etc. |
| Operating Temperature |
20° to 120°F (-7° to 49°C) |
| Storage Temperature |
-20° to 150°F (-29° to 66°C) |
| Humidity |
80% RH (noncondensing) |
| Water Resistance |
Splash and water resistant, not waterproof. |
|
