MultiScanner® i520 OneStep®
MultiScanner® i520 OneStep® quickly and easily locates the edges and center of wood and metal studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, SpotLite® Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.
- Stud Scan mode locates the edges and center of wood or metal studs up to 3/4 inch (19 mm) deep
- DeepScan® mode doubles the scanning depth to 1 1/2 inches (38 mm)
- An ultra-bright LCD screen indicates direction, edges and center of studs
- AC Scan finds and traces live, unshielded electrical wiring up to 2 inches deep
- Metal mode detects non-ferrous metal, such as copper pipes, up to 1 1/2 inches (38 mm) deep, and ferrous metal, such as rebar, up to 3 inches (76 mm) deep
- WireWarning® detection indicates the presence of live, unshielded electrical wire up to 2 inches (51 mm) deep in stud and metal scanning modes
- ACT™ (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud
|
|
|
Find Stud Center
CenterVision® technology is the most exciting innovation to hit stud finding since Zircon introduced the original electronic stud finder back in 1980.
Instead of the dual-scan-and-mark procedure, users need only make one pass to find dead-center every time.
CenterVision® tools will even find the center of a double stud, although it will display a wide "center" zone.
CenterVision® technology takes all the guesswork out of locating the best place to anchor into a stud.
Scan Thick Walls for Studs
Sometimes because of extra layers of wallboard or paneling, the studs are too deep to be found by standard scanning.
Tools with Zircon's Deepscan® feature can be switched to a higher strength to detect studs and joists up to 1 1/2 inches deep.
This extra power shouldn't be used unless necessary, because on normal walls it is oversensitive and results in too many false positives.
Scan for Electrical
This AC Scan mode in Zircon® MultiScanner® products lets you search for hot AC voltage (unshielded by metal).
Use this feature to find and trace wires.
You can use you tool's interactive calibration feature to get the most accurate results.
|
|
|
| |
