BACK

StudSensor™ L70 OneStep®

FEATURES

FIND STUD CENTER
FIND STUD EDGES
FIND WOOD OR METAL STUDS
SCAN THICKER WALLS
WIREWARNING® DETECTION
ERASABLE MARKER
LOW BATTERY INDICATOR

StudSensor™ L70 OneStep®

The StudSensor™ L70 OneStep® stud finder locates the center, edges, and direction of wood and metal studs while also alerting you to the presence of live AC electrical wiring. It features a bright, backlit LCD display and a low battery indicator informing you when your battery should be replaced for optimum performance.

  • StudScan mode locates the center, edges, and direction of wood or metal studs up to 3⁄4 in. (19 mm) deep
  • DeepScan® mode doubles the scanning depth to 1 1⁄2 in. (38 mm)
  • WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) deep
  • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
  • Ultra-bright backlit LCD display indicates target location
  • Low battery indicator for optimum performance
  • Signal Strength indicator helps to distinguish between shallow and deep targets
  • SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate the center of the stud
  • “V” marker groove for more accurate marking of stud location
  • Patented pivot pinch grip for a comfortable, secure hold in either hand, at any angle

The StudSensor™ L70 OneStep® stud finder locates the center, edges, and direction of wood and metal studs while also alerting you to the presence of live AC electrical wiring. It features a bright, backlit LCD display and a low battery indicator informing you when your battery should be replaced for optimum performance.

  • StudScan mode locates the center, edges, and direction of wood or metal studs up to 3⁄4 in. (19 mm) deep
  • DeepScan® mode doubles the scanning depth to 1 1⁄2 in. (38 mm)
  • WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) deep
  • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
  • Ultra-bright backlit LCD display indicates target location
READ MOREREAD LESS
Back To Top