In StudScan and DeepScan® modes, the tool will indicate the presence of wood OR metal studs with a stud indication (but will not indicate whether the stud is wood or metal). MultiScanner™ models with Metal Scan mode can be used to verify whether the stud located in Stud Scan or DeepScan® mode is metal.
To verify whether the stud you located in Stud Scan or DeepScan® mode is metal or wood, you would need a MultiScanner™ stud finder with Metal Scan mode (or a dedicated metal finder). Switch the mode to Metal Scan and scan the stud again. If you receive positive metal indications from floor to ceiling, the stud you …
WireWarning® detection is a feature to alert the user to the presence of live, unshielded electrical AC wires while scanning for studs and metal. The WireWarning ® detection is always on in StudScan, DeepScan ®, or Metal Scan modes. (An LED light will flash, or a lightning bolt icon will appear on the LCD display when live AC voltage …
The flashing, or blinking, is most likely caused by a low battery condition. Please replace your battery with a brand new 9V alkaline battery with an extended expiration date at least 3 years out from the current date. Zircon stud finders require a robust, fully charged 9V alkaline battery to properly operate. This is especially …
Electrical field locators may not detect live AC wires if the wires are more than 2 inches from the scanned surface, in concrete, encased in conduit, present behind a plywood shear wall or metallic wall covering, or if moisture is present in the environment or scanned surface. If your tool has Metal Scan mode, use …
No two tile walls are alike. We do not recommend the use of basic StudSensor™ models with only Stud Scan or DeepScan® modes to locate studs behind tiled walls. MultiScanner™ models with Metal Scan mode may help to identify the pattern of nails or screws attaching the lath or sheetrock to the wall beneath the tile. Zircon Tip …
Important Message: Zircon Leak Alert “Low Battery Alert” Notification During the initial configuration of your Leak Alert™ WiFi, you may receive a “Low Battery Alert” notification to your configured email address(es) as a result of a temporary dip in the battery voltage during the configuration process. This is not uncommon. The battery will quickly recover …
Zircon Customer Service and Technical Support is available Monday through Friday, 8:00 AM to 5:00 PM Pacific Time: 1-800-245-9265Closed 2025: 1/1, 2/17, 5/26, 7/4, 9/1, 11/27-11/28, 12/25-12/26 You may also access our ZirconTV YouTube channel for the latest How-to videos and our online Interactive Support Center.
Please click on the link below to view the latest software version and revision history. PDF Instructions of Software Update More info – Leak Alert™ WiFi Software Revisions
To verify whether the stud you located in Stud Scan or DeepScan® mode is metal or wood, you would need a MultiScanner™ stud finder with Metal Scan mode (or a dedicated metal finder). Switch the mode to Metal Scan and scan the stud again. If you receive positive metal indications from floor to ceiling, the …
