Cart

• StudScan mode locates the edges of wood or metal studs up to ¾ in. (19 mm) deep
• READY light indicates when calibration is complete and tool is ready for use
• EDGE arrow illuminates when you have found the edge of the stud
• Zircon's patented "over-the-stud" indication alerts you to start the scan in a new location as scanning began over a stud
• SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate the edge of the stud
• Translucent base and illuminated "V" marker groove for more accurate marking of stud edge location

• Battery Type 9V alkaline, required
• Dimensions 5.33 in. H x 2.16 in. W x 1.22 in. D (135 mm x 55 mm x 31 mm)
• Weight 2.5 oz. (71 g) without battery

Position Accuracy*

• Wood studs: Typically within ¹⁄₈ in. (3 mm) using the dual scan and mark procedure
• Metal studs: Typically within ½ in. (13 mm) using the dual scan and mark procedure

Depth*

• Typically up to ¾ in. (19 mm)

Water Resistance: Splash and water resistant, not waterproof

This product is covered by Zircon’s Limited Lifetime Warranty for the United States and Canada.