Feature Highlights
DeepScan® Mode
Doubles scanning depth for thicker surfaces
Drill Guides
Accurately detect exit points before drilling and coring
ExitPoint® XL500
Accurately detect exit points before drilling and coring with the Zircon® ExitPoint® XL500 through-hole drill guide. The XL500 is the easiest and fastest way to locate a precise spot, without measuring, before you start your project.
Description
Accurately locate exit points through floors, walls, ceilings, and more with magnetic field detection technology.
The new Zircon® ExitPoint® XL500 through-hole drill guide provides a fast and easy solution to determine the exit point location for your drilling and coring applications. Locate a precise spot, without measuring, before you start your project to save time and money by eliminating guesswork, rework, and needless holes. Scans through most types of non-metallic building materials such as wood, drywall, gypsum panels, bricks, and poured concrete up to 9 in. (22.9 cm) thick.
Ideal for cable and wire installations, concrete scanning, and any time through-hole drilling is required. Simply affix the Target Magnet on the spot you want to drill, then scan in the same vicinity on the opposite surface of the Target Magnet with the Receiver. The Directional Indicator LEDs will point toward the magnet. When the Receiver is near the Target Magnet, all LEDs will light red to indicate the drill location.
Features two scan modes:
- Normal Mode scans through conventional interior walls up to 4.5 in. (11.4 cm) thick
- DeepScan® Mode scans through materials up to 9 in. (22.9 cm) thick
Includes Receiver, (1) small and (1) large Target Magnet, (9) reusable adhesive disks, 9V battery, and protective carrying case.
Note: Tool does not detect hidden objects behind the wall. Must use other information sources to locate, and avoid, objects behind surface before drilling.
Documentation
ExitPoint® XL500 Instructions ExitPoint® XL500 Datasheet