Cart

• NEW! – Target Control™ (TC™) Mode locates the center edges and direction of wood studs and not metal up to ¾ in. (19 mm) deep. Identifies ‘safe-to-drill’ zones between adjacent drywall screws nails or protector plates
• StudScan Mode locates center edges and direction of wood and metal studs up to ¾ in. (19 mm) deep
• WireWarning® Detection continuously alerts to the presence of live unshielded AC wires up to 2 in. (50 mm) deep
• LoLevel™ Indicator displays low (weak) signal objects such as plastic water pipes while in TC™ mode
• Signal Strength Indicator helps distinguish between shallow and deep targets while in StudScan mode
• ACT™ (Auto Correcting Technology) automatically corrects common errors such as when scanning begins over a stud
• Target Spotlight illuminates on screen when stud center is detected
• ColorTrip® Display illuminates blue in TC™ mode
• SpotLite® Pointer shines an arrow-shaped light on the scanned surface to indicate the center of a stud
• “V” marker groove enables accurate marking of stud location
• Low Battery Indicator for optimum performance

• 9V alkaline battery required, not included
• Dimensions 7.2 in. x 3.2 in. x 0.9 in. (184 mm x 82 mm x 22 mm)
• Weight 8.5 oz. (242 g)
• Position Accuracy Up to a depth of ¾ in. (19 mm) typically, within 1⁄8 in. (3 mm)
• Depth Target Control™ mode: up to ¾ in. (19 mm)
• StudScan mode: up to ¾ in. (19 mm)
• WireWarning® Position Accuracy Typically, 120-230V at 50-60Hz within 6 in. (150 mm) of hot unshielded wire in drywall
• WireWarning® Depth Up to 2 in. (50 mm) deep
• Water Resistance Splash and water resistant, not waterproof

This product is covered by Zircon’s Limited Lifetime Warranty for the United States and Canada.