Cart

• StudScan mode locates the edges and center of wood or metal studs up to ¾ in. (19 mm) deep
• DeepScan® mode doubles the scanning depth to 11⁄2 in. (38 mm)
• Metal Scan mode locates ferrous metal, such as rebar, up to 3 in. (76 mm) deep
• WireWarning® Detection indicates the presence of live, unshielded electrical wire up to 2 in. (51 mm) deep
• ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud

• Battery Type 9 V alkaline (not included)
• Dimensions 7.28 in. H x 3.27 in. W x 1.43 in. D (185 mm x 83 mm x 36 mm)
• Weight 6.2 oz. (175 g) without battery

Position Accuracy*

• Up to a depth of 3⁄4 in. (19 mm): Typically within 1⁄8 in. (3 mm)
• Up to a depth of 11⁄2 in. (38 mm): Typically within 3⁄16 in. (5 mm)
• In Metal Scan mode: Typically within 1⁄2 in. (13 mm) using the dual scan and mark procedure

Depth*

• StudScan mode: Up to 3⁄4 in. (19 mm)
• DeepScan® mode: Up to 11⁄2 in. (38 mm)
• Metal Scan mode: Up to 3 in. (76 mm) for rebar
• AC Position Accuracy*

WireWarning® Detection:

• Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded wire in drywall
• AC Depth* In typical wall with Romex® wiring, wire can be detected up to 2 in. (51 mm) deep

Splash and water resistant, not waterproof

*NOTE: See tool's instructions for more information.

Sensing depth and accuracy can vary due to moisture, content of materials, wall texture, paint, etc.

Indoor use only.

This product is covered by Zircon’s Limited Lifetime Warranty for the United States and Canada.