Cart

• Stud Scan mode locates the edges and center of wood or metal studs up to 3/4 in. (19 mm) deep
• Metal mode detects ferrous metal, such as steel pipe, up to 3 in. (76 mm) deep
• DeepScan® mode doubles the scanning depth to 1 1/2 in. (38 mm)
• AC Scan locates live, unshielded electrical wiring up to 2 in. deep.
• WireWarning® detection indicates the presence of live, unshielded electrical wire up to 2 in. (51 mm) deep in stud and metal scanning modes.
• ACT™ (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud.
• Backlit LCD Display
• LCD Display

• Battery Type 9V alkaline (not included)
• Dimensions 7.28 in. H x 3.27 in. W x 1.43 in. D (185 mm x 83 mm x 36 mm)
• Weight 6.5 oz. (184 g) without battery
• Splash and water resistant, not waterproof
• Indoor use only

Position Accuracy*

• Up to a depth of 3⁄4 in. (19 mm): Typically within 1⁄8 in. (3 mm)
• Up to a depth of 11⁄2 in. (38 mm): Typically within 3⁄16 in. (5 mm)
• Metal Scan mode: Typically within 1⁄2 in. (13 mm) using the dual scan and mark procedure

Depth*

• StudScan mode: Up to 3⁄4 in. (19 mm)
• DeepScan® mode: Up to 11⁄2 in. (38 mm)
• Metal Scan mode: Up to 3 in. (76 mm) for rebar

WireWarning® Position Accuracy*

• Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded wire in drywall

WireWarning® Depth*

• In typical wall with Romex® wiring, wire can be detected up to 2 in. (51 mm) deep
  

*NOTE: See tool's instructions for more information. Sensing depth and accuracy can vary due to moisture, content of materials, wall texture, paint, etc.

This product is covered by Zircon’s Limited Lifetime Warranty for the United States and Canada.